2021–2025 Nissan Rogue key fob battery
The 2021–2025 Nissan Rogue key fob takes a CR2032, a 20 × 3.2 mm 3 V lithium cell. Below: how to open it, what to do if it dies, and the manual we checked.
Buy CR2032 batteries CR2032 specs & equivalents
Our pick: Duracell CR2032, 2-pack on Amazon, a name-brand cell in child-resistant packaging.
Tip: change the spare key at the same time. Both cells usually age together.
Quick facts
Before you start
- Get a new CR2032 cell from a fresh pack.
- Work over a table or soft cloth so small parts and buttons don’t get lost.
- Note which way the old battery faces before you take it out.
- Keep loose coin cells away from children and pets. See coin battery safety.
How to replace the 2021–2025 Nissan Rogue key fob battery
- Pull the mechanical key out of the Intelligent Key
- Put a cloth over the case, slip a small flat screwdriver into the slit at the corner and twist to split the two halves
- Hold the new CR2032 by its edges and fit it with the + side facing the bottom of the case
- Line up the tips of both halves and press them together until they click shut
- Press the buttons to check the key works
Confirmed in the 2021, 2022, 2023, 2024 and 2025 Rogue owner's manuals (Intelligent Key, CR2032 in all). Do not touch the circuit board or terminals.
After you change the battery
- Press lock and unlock from a few metres away. The car should react on the first press.
- On push-button start cars, start the engine once with the fob in your pocket.
- If nothing happens, re-open the fob and check the battery direction and contacts. More fixes: key fob not working after a battery change.
Starting the car if the fob battery is dead
Shift to P and press the brake firmly. Touch the start button with the Intelligent Key until a chime sounds, then within 10 seconds press the start button with the brake still held. A Key Battery Low message may appear; replace the cell soon.
General backup methods: how to get in and start with a dead fob.
About the CR2032 battery
CR2032 is a 20 mm × 3.2 mm, 3 V lithium cell with a typical capacity of about 225 mAh. The same size is sold as DL2032, ECR2032, KCR2032, 5004LC. A CR2012 or CR2016 or CR2025 has the same diameter but is thinner, so it can fit loosely and runs down sooner. Stick with CR2032.
Photos from Nissan Rogue owners
No owner photos yet for this generation.
Other vehicles that use a CR2032
2020–2023 Mazda CX-302021–2025 Mazda CX-52020 Mazda CX-52023–2024 Mazda CX-502021–2023 Mazda CX-92020 Mazda CX-92019–2023 Mazda Mazda32020 Mazda Mazda62021–2023 Mazda MX-5 Miata2020 Mazda MX-5 Miata
Questions
What battery does the 2021–2025 Nissan Rogue key fob use?
1 × CR2032 (smart key).
How many batteries does the 2021–2025 Nissan Rogue key fob need?
1 CR2032 cell.
Can I use a CR2012 or CR2016 or CR2025 instead of a CR2032?
It has the same 20 mm diameter but is thinner, so it can lose contact and runs down sooner. Use a CR2032.
Which battery names are the same as CR2032?
DL2032, ECR2032, KCR2032, 5004LC are the same size as CR2032.
How do I start the 2021–2025 Nissan Rogue if the key fob battery is dead?
Shift to P and press the brake firmly. Touch the start button with the Intelligent Key until a chime sounds, then within 10 seconds press the start button with the brake still held. A Key Battery Low message may appear; replace the cell soon.
Do I need to reprogram the key after changing the battery?
Most key fobs keep their pairing when the battery is changed. If the fob stops working, check the battery direction and contacts first; our troubleshooting guide covers the rest.
Related guides
Fob not working after a battery change?Signs the fob battery is dyingStarting a car with a dead fobCR2032 vs CR2025 vs CR2016