Home › Key fobs › Mazda › MX-5 Miata 2021–2023

2021–2023 Mazda MX-5 Miata key fob battery

The 2021–2023 Mazda MX-5 Miata key fob takes a CR2032, a 20 × 3.2 mm 3 V lithium cell. Below: how to open it, what to do if it dies, and the manual we checked.

CR2032
Smart key (push-button start)

Buy CR2032 batteries CR2032 specs & equivalents

Our pick: Duracell CR2032, 2-pack on Amazon, a name-brand cell in child-resistant packaging.

Tip: change the spare key at the same time. Both cells usually age together.

Mazda MX-5 Miata from the 2021–2023 generation
Mazda MX-5 Miata, 2021–2023 generation · Photo: Yaktatel, Public domain, via Wikimedia Commons (resized)

Quick facts

BatteryCR2032
Quantity1
Size20 × 3.2 mm
Voltage3 V lithium
Key typesmart key
Time neededAbout 5 minutes
Toolssmall flat-blade screwdriver, tape (to protect the case)

Before you start

How to replace the 2021–2023 Mazda MX-5 Miata key fob battery

  1. Slide the knob and remove the lower cover
  2. Press the tab to release the upper cover, then pry it off with a tape-wrapped flat screwdriver
  3. Lift off the cap and remove the old cell
  4. Fit the new CR2032 with the + side facing up and refit the cap
  5. Refit the upper cover, then hook the lower cover tabs into their slots and snap it on

Confirmed in the 2021, 2022 and 2023 MX-5 Miata owner's manuals (CR2032 in all).

After you change the battery

About the CR2032 battery

CR2032+20 mmThickness (side view)CR2032 · 3.2 mmCR2025 · 2.5 mmCR2016 · 1.6 mmCR2012 · 1.2 mm
Drawn to scale by FobCells. The flat side marked + is the positive side.

CR2032 is a 20 mm × 3.2 mm, 3 V lithium cell with a typical capacity of about 225 mAh. The same size is sold as DL2032, ECR2032, KCR2032, 5004LC. A CR2012 or CR2016 or CR2025 has the same diameter but is thinner, so it can fit loosely and runs down sooner. Stick with CR2032.

Photos from Mazda MX-5 Miata owners

No owner photos yet for this generation.

Share a photo of your key

Other vehicles that use a CR2032

2020–2023 Mazda CX-302021–2025 Mazda CX-52020 Mazda CX-52023–2024 Mazda CX-502021–2023 Mazda CX-92020 Mazda CX-92019–2023 Mazda Mazda32020 Mazda Mazda62020 Mazda MX-5 Miata2021–2025 Nissan Rogue

Other Mazda MX-5 Miata years

20202016–2019

Questions

What battery does the 2021–2023 Mazda MX-5 Miata key fob use?

1 × CR2032 (smart key).

How many batteries does the 2021–2023 Mazda MX-5 Miata key fob need?

1 CR2032 cell.

Can I use a CR2012 or CR2016 or CR2025 instead of a CR2032?

It has the same 20 mm diameter but is thinner, so it can lose contact and runs down sooner. Use a CR2032.

Which battery names are the same as CR2032?

DL2032, ECR2032, KCR2032, 5004LC are the same size as CR2032.

Do I need to reprogram the key after changing the battery?

Most key fobs keep their pairing when the battery is changed. If the fob stops working, check the battery direction and contacts first; our troubleshooting guide covers the rest.

Related guides

Fob not working after a battery change?Signs the fob battery is dyingStarting a car with a dead fobCR2032 vs CR2025 vs CR2016

Source: Owner's manual · Last verified 2026-10-17. Battery data is checked against the manufacturer’s own documentation; replacement steps are written in our own words. Vehicles vary by market and build date, so check the code on your old battery. How we verify · Report an error
CR2032 2021–2023 Mazda MX-5 MiataBuy